NIMBUS PART 2 (Angel’s/God’s Messengers=Giants/Starry Hosts/Signs) Do NOT have wings or halos

Halo (optical phenomenon)

Page issues

For other uses, see Halo (disambiguation).

22° halo around the sun as viewed in the sky over Annapurna Base Camp, AnnapurnaNepal

From top to bottom:
circumzenithal arcsupralateral arcParry arcupper tangent arc, and 22° halo

Halo (from Greek ἅλωςhalōs[1]) is the name for a family of optical phenomena produced by light interacting with ice crystals suspended in the atmosphere. Halos can have many forms, ranging from colored or white rings to arcs and spots in the sky. Many of these are near the Sun or Moon, but others occur elsewhere or even in the opposite part of the sky. Among the best known halo types are the circular halo (properly called the 22° halo), light pillars and sun dogs, but there are many more; some of them fairly common, others (extremely) rare.

The ice crystals responsible for halos are typically suspended in cirrus or cirrostratus clouds high (5–10 km, or 3–6 miles) in the upper troposphere, but in cold weather they can also float near the ground, in which case they are referred to as diamond dust. The particular shape and orientation of the crystals are responsible for the type of halo observed. Light is reflected and refracted by the ice crystals and may split up into colors because of dispersion. The crystals behave like prisms and mirrors, refracting and reflecting light between their faces, sending shafts of light in particular directions.

Atmospheric phenomena such as halos were used as part of weather lore as an empirical means of weather forecasting before meteorology was developed. They often do mean that rain is going to fall within the next 24 hours as the cirrostratus clouds that cause them can signify an approaching frontal system.

Other common optical phenomena involving water droplets rather than ice crystals include the glory and the rainbow.


While Aristotle had mentioned halos and parhelia, in antiquity, the first European descriptions of complex displays were those of Christoph Scheiner in Rome (circa.1630), Hevelius in Danzig (1661), and Tobias Lowitz in St Petersburg (c.1794). However, Chinese observers had recorded these for centuries, the first reference being a section of the “Official History of the Chin Dynasty” (Chin Shu) in 637, on the “Ten Haloes”, giving technical terms for 26 solar halo phenomena.[2]

Light pillarEdit

Main article: Light pillar

A light pillar, or sun pillar, appears as a vertical pillar or column of light rising from the sun near sunset or sunrise, though it can appear below the sun, particularly if the observer is at a high elevation or altitude. Hexagonal plate- and column-shaped ice crystals cause the phenomenon. Plate crystals generally cause pillars only when the sun is within 6 degrees of the horizon, or below it; column crystals can cause a pillar when the sun is as high as 20 degrees above the horizon. The crystals tend to orient themselves near-horizontally as they fall or float through the air, and the width and visibility of a sun pillar depend on crystal alignment.

Light pillars can also form around the moon, and around street lights or other bright lights. Pillars forming from ground-based light sources may appear much taller than those associated with the sun or moon. Since the observer is closer to the light source, crystal orientation matters less in the formation of these pillars.

Circular haloEdit

Further information: 22° halo

Among the best-known halos is the 22° halo, often just called “halo”, which appears as a large ring around the Sun or Moon with a radius of about 22° (roughly the width of an outstretched hand at arm’s length). The ice crystals that cause the 22° halo are oriented semi-randomly in the atmosphere, in contrast to the horizontal orientation required for some other halos such as sun dogs and light pillars. As a result of the optical properties of the ice crystals involved, no light is reflected towards the inside of the ring, leaving the sky noticeably darker than the sky around it, and giving it the impression of a “hole in the sky”.[3] The 22° halo is not to be confused with the corona, which is a different optical phenomenon caused by water droplets rather than ice crystals, and which has the appearance of a multicolored disk rather than a ring.

Other haloes can form at 46° to the sun, or at the horizon, or around the zenith, and can appear as full haloes or incomplete arcs.

Other namesEdit

In the Anglo-Cornish dialect of English, a halo round the sun or the moon is called a cock’s eye and is a token of bad weather. The term is related to the Breton word kog-heol (sun cock) which has the same meaning.[4] In Nepal, the halo round the sun is called Indrasabha with a connotation of the assembly court of Lord Indra – the Hindu god of lightning, thunder and rain.[5]

Artificial halosEdit

The natural phenomena may be reproduced artificially by several means. Firstly, by computer simulations,[6][7] or secondly by experimental means. Regarding the latter, one may either take a single crystal and rotate it around the appropriate axis/axes, or take a chemical approach. A still further and more indirect experimental approach is to find analogous refraction geometries.

Analogous refraction approachEdit

Analogous refraction demonstration experiment for the Circumzenithal Arc.[8] Here, it is mistakenly labelled as an artificial rainbow in Gilberts book[9]

This approach employs the fact that in some cases the average geometry of refraction through an ice crystal may be imitated / mimicked via the refraction through another geometrical object. In this way, the Circumzenithal arc, the Circumhorizontal arc and the suncave Parry arcs may be recreated by refraction through rotationally symmetric (i.e. non-prismatic) static bodies.[8] A particularly simple table-top experiment reproduces artificially the colorful circumzenithal and circumhorizontal arcs using a water glass only. The refraction through the cylinder of water turns out to be (almost) identical to the rotationally averaged refraction through an upright hexagonal ice crystal / plate-oriented crystals, thereby creating vividly colored circumzenithal and the circumhorizontal arcs. In fact, the water glass experiment is often confused as representing a rainbow and has been around at least since 1920.[9]

Chemical approachesEdit

The earliest chemical recipes to generate artificial halos has been put forward by Brewster and studied further by A. Cornu in 1889. [10] The idea was to generate crystals by precipitation of a salt solution. The innumerable small crystals hereby generated will then, upon illumination with light, cause halos corresponding to the particular crystal geometry and the orientation / alignment. Several recipes exist and continue to be discovered.[11] Rings are a common outcome of such experiments.[12] But also Parry arcs have been artificially produced in this way.[13]

Mechanical approachesEdit

Single axisEdit

The earliest experimental studies on halo phenomena have been attributed[14]to Auguste Bravais in 1847.[15] Bravais used an equilateral glass prism which he spun around its vertical axis. When illuminated by parallel white light, this produced an artificial Parhelic circle and many of the embedded parhelia. Similarly, A. Wegener used hexagonal rotating crystals to produce artificial subparhelia.[16] In a more recent version of this experiment, many more embedded parhelia have been found using commercially available[17]hexagonal BK7 glass crystals.[18] Simple experiments like these can be used for educational purposes and demonstration experiments.[11][19]Unfortunately, using glass crystals one cannot reproduce the circumzenithal arc or the circumhorizontal arc due to total internal reflections preventing the required ray-paths when <span class="lazy-image-placeholder loaded" data-src="; data-alt="{\displaystyle n<img class="mwe-math-fallback-image-inline" src="; alt="{\displaystyle n.

Even earlier than Bravais, the Italian scientist F. Venturi experimented with pointed water-filled prisms to demonstrate the circumzenithal arc.[20][21] However, this explanation was replaced later by the CZA’s correct explanation by Bravais.[15]

Artificial Halo projected on a spherical screen.[22][23] Visible are: Tangential arcs, Parry arcs, (sub)parhelia, parhelic circle, heliac arcs

Artificial ice crystals have been employed to create halos which are otherwise unattainable in the mechanical approach via the use of glass crystals, e.g. circumzenithal and circumhorizontal arcs.[24] The use of ice crystals ensures that the generated halos have the same angular coordinates as the natural phenomena. Other crystals such as NaF also have a refractive index close to ice and have been used in the past.[25]

Two axesEdit

In order to produce artificial halos such as the tangent arcs or the circumscribed halo one should rotate a single columnar hexagonal crystal about 2 axes. Similarly, the Lowitz arcs can be created by rotating a single plate crystal about two axes. This can be done by engineered halo machines. The first such machine was constructed in 2003;[26] several more followed.[23][27]Putting such machines inside spherical projection screens, and by the principle of the so-called sky transform,[28] the analogy is nearly perfect. A realization using micro-versions of the aforementioned machines produces authentic distortion-free projections of such complex artificial halos.[8][22][23]Finally, superposition of several images and projections produced by such halo machines may be combined to create a single image. The resulting superposition image is then a representation of complex natural halo displays containing many different orientation sets of ice prisms.[22][23]

Three axesEdit

The experimental reproduction of circular halos is the most difficult using a single crystal only, while it is the simplest and typically achieved one using chemical recipes. Using a single crystal, one needs to realize all possible 3D orientations of the crystal. This has recently been achieved by two approaches. The first one using pneumatics and a sophisticated rigging,[27] and a second one using an Arduino-based random walk machine which stochastically reorients a crystal embedded in a transparent thin-walled sphere.[19]


See alsoEdit



Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s